Monday, 7 May 2012

Back in the workshop

I've not been in my workshop proper for a while really, it needs a good sort out and to be honest I need more space or at least a lot of work, something I am not so keen on in rented accommodation. But in any case being able to see the bench is a good start.

Something I picked up a few months back from Ikea was a plastic CD/DVD organizer thing (INREDA). The moment I saw it I knew what I could use it for. Organizing my small tool draw, works pretty well. I think you can buy things for exactly this purpose but I am not sure they will stand impatient draw slamming like this one.

It would also be excellent for sorting endmills, reamers and drills etc. Perhaps with some little squares of foam as seperators if needed.


The clear bench inspired me to finally mount my Milwaukee Portaband saw on the stand I got for it last summer. I have some pretty good excuses for not getting this done sooner but it really only took 10 minutes. The stand is by Swag off road and it works well. I need to get a new blade for the saw though, I picked it up on Ebay and you could ride "bare arsed to London" on the supplied blade as my Dad used to say. The only downsides of the stand are the shipping and I am also not a fan of the big logos in the side. If it is strong enough even with all these cuts then I have to wonder why all that materials is there in the first place. He has now update the design and it comes in three pieces, that should reduce the shipping as volume is a factor. You can also get a simpler stand that is just the top section which you clamp in a vice.


Cuts in 10mm Ali were really accurate despite the blunt blade.

Cheese dreams

This post should be filed directly under the "for shits and giggles" category (shouldn't they all). It struck me that keys, even those with security keyways are susceptible from copying and you can even buy/make proper key copying systems from high tech keyway scanning cutters to clay and low melting point allow.

But what would Maguyver do? While thinking these thoughts I was enjoying a few Babybel cheeses, they come in a wax coating which is much softer than candle wax. Hmm.














1. The left over wax from the Babybels, note the nice "Damascus" finish caused by the inner white wax and the outer red. 2. The wax was melted in some tin foil boats with a hot air gun. I put it in the freezer to harden and make it easier to remove the foil. 3. I wrapped it in cling film (food wrap) to act as a barrier because once at room temp it is really soft and sticky. 4/5. The impressions left by the key after squeezing the two halves onto it. 6. The result cast in epoxy, it was far from perfect, the process could work but you need to put the wax into boxes so that it is constrained when you press the halves onto the key, also good for registration of the mould halves. An alternative for registration with this method is a couple of ball bearings pressed into the wax beside the key when impressioned.

Does it open a lock? I have no idea, I accidentally made it for a lock I broke, doh!

Saturday, 5 May 2012

Exciting times in 3D printing

3D printers that build up models by setting UV curable resins with lasers, layer by layer are one of the oldest types of 3D printer, however, they are still one of the most expensive. Several years ago someone hit upon the idea of using projectors to cure resin selectively, the paper I read used a UV light source and an industrial LCD. LCDs however don't really like UV very much at least bog standard ones filter a lot of it.

Texas instruments then came up with their DLP micro mirror projectors which image using an array of tiny mirrors. These too can be affected by UV but at least do pass it. Several companies now produce printers based on this technology.

The printers are simple in principle, a light source with a decent UV content (a projector bulb has plenty) and a DLP projector and then some means of moving a build platform up and down. You have two options when building, you can build from the top of a vat of resin and move the build platform down or you can build through the transparent bottom of a vat and move the built platform upwards. The latter method is simpler in many ways but you can have problems with your part sticking to the vat bottom either through adhesion or the vacuum forces created as the part is lifted from the vat bottom (try lifting a piece of glass off another directly upwards).

A few amateurs have had a go at making this type of printer and have had good success, this one in particular is really amazing and has already produced excellent results. He hopes to make a low cost kit in the near future, check out his Facebook page for more info: http://www.facebook.com/B9Creator


A render of the production model, the real thing looks as good (or it will with once anodized)




The prototype machine making a lovely model of the Eiffel tower.

New toy

I just picked up this bad boy on Ebay. A Sargent and Greenleaf 6730 combination lock. The better S&G locks have a little knob on them which you turn when you are ready to open and this prevents any manipulation but this one allows the classic stethoscope wielding activities from the movies. Of course in reality you don't bother with a stethoscope and it normally requires a good couple of hours of graph drawing and wiggling. I only know the theory, this will be my first chance to actually try, at least when it arrives. Maybe tomorrow?


Wednesday, 2 May 2012

Autodesk 123D

And now for something completely different, Autodesk the creators of the venerable Autocad and 3Ds max have some out with some interesting software over recent years in the shape of Autodesk 123D suite of apps or programs as I like to call them. These include:

123D: A Free 3D modelling package
123D Catch: Software that creates 3D models from photographs
123D Sculpt: 3D z-brush type sculpting for the iPad
123D Make: Software for creating laminated models, sort of LOM (laminated object modelling) ghetto style, either with a laser cutter or with scissors.

I was aware of Catch and Make but had not really checked out the range, sculpt looks particularly interesting. With 3D printers reducing in price, simple interfaces to make "pretty things" will be essential. I'm also going to check out the basic CAD package to see how friendly that is. Most of my CAD needs are engineering based so it may not suit me but it will be very interesting to see.

Tuesday, 1 May 2012

"Can" you believe it

This is the third and forth key I have created using impressioning. The lock is a euro cylinder by E*S and I have no key for it at all. I was extremely surprised when the lock opened after very little work, although I guess the fact all the pins are set so shallowly does not detract from the security (and I have to guess) it does not fill me with great confidence. Luckily the lock is in a cardboard box not in a door.

The impressioning was MUCH easier than on the previous lock. The keyway is the same so I think I was wrong to blame the keyway, however, for a given keyway you have some leeway (poet) over where you place the pins, the Yale was further off to the side resulting in just bruising of the edges at first. The E*S gave the text book marks.

Then I was thinking again about the lead edged key, it would be fine to make a mould for a specific keyway but what if something unusual comes up and you don't have a blank and would you ever really want to have hundreds of moulds? I was looking at Yale master blanks online and they showed how the warding varied so that you could have various levels of master simply based on the wards. The super master barely had any material left, it was as if you took a blank and cut the grooves for all the different wards for all the keys out of it.

I wondered, what about just making something from sheet metal, especially a soft one! I quickly made a blank from some aluminium sheet, I would have used coke can but I did not have any so it is a little thicker. I spent some time forming it to fit the keyway and after a while had something reasonable. Then I tried impressioning. Obviously the key is not strong enough for the cranking part of the action so for that I used a screwdriver, I then just wiggled the key. Again the softer aluminium took the marks fairly easily, the fact it was thin also seemed to help. After a while I had a key that worked albeit with the need for a screwdriver to do the turning.

So don't lock me in a room with a coke can (and a pair of scissors and a round file and a magnifier and some pliars and a screwdriver) because I can escape!


Firing blanks?

The key with the edge made from solder worked so well but it was such a pain to actually make the blank. I decided to look at casting one. The idea was to make a mould of a normal key blank in a high temperature epoxy so that the filed down blank could then have the solder cast onto its edge. This did not work, firstly I tried to get clever with my mould making and that failed but secondly I think the approach was doomed to fail. OK, let's start with the mould making, I applied some foil tape to one side of the blank carefully burnishing it into the cuts on the side of the key. This foil would form the parting line the the mould. I coated the other side of the key in Vaseline (petrolium jelly) and dunked it into a little tube filled with epoxy. The tube was the backing from the foil tape, the epoxy was "JB weld", quite famous but it is my first time using it. 10min in the oven at around 70 and it was set. I pulled off the wax paper and sanded the sides of the block to reveal the foil tape and then split the mould with a screwdriver. It did split but the vaseline did not do a good job, possibly the heat was not such a good idea. Normally I use wax and will do in the future, that was fail part 1.





Fail part 2 involved my salvaging what I could of the mould and trying it out "by hook or crook". The result was failure. This is more than just casting, if you want the solder to really stick to the brass blank then the blank must be up to soldering temperature, this ensures the solder retains a low viscosity as it passes over the surface and wicks into the microscopic details of the brass. Otherwise it just freezes on contact or sits on the surface like a balloon full of water. But the fact that the resin is a fairly good insulator meant I could just not get the solder to flow into the mould and contact with the key, the resin also got rather soft (still awesome stuff though!). The mould also needs to be up to temp and I think the easiest way for that is if it is made from aluminium. This is possible but I am not sure if I want to go that far right now. If I did I would cut a blank in half, pop it on the flatbed scanner and create some CAD for a mould, then mill with a little ball ended cutter (I have down to 0.5mm). The mould can be a little oversize, as long as it cuts down the work, hmm maybe tomorrow.