Tuesday, 15 May 2012

RectiFIRE?

Making some progress still, I started off by emailing Hypertherm, I heard they had really good customer service so I thought I would ask for some tips from tech support. Initially they did not seem to understand my request, "the power board might be faulty". So I explain that I know it is faulty but wonder if they might have an idea of the likely culprit that could cause this fault. I got this back: "We are not aware of any problem with the power board. You will need to replace it." OK so there is nothing wrong with the board I just need to replace it. To be honest I am not suprised they are not massively helpful, most companies are not interested in assisting repair.

So I move on and look at the schematics which are laid out to match the board which is nice but resemble spaghetti. With some help from a friend I redrew the first stages of the circuit so I could actually understand it and determined that the cause of the high current that was cooking the resistor was probably either the rectifier that produces rectified DC to the power factor correction inverter or a capacitor on the rectifiers output. Some resistance testing suggested the former. So I took the board off and this is what I found:



These are two bridge rectifiers that are wired in parallel, each can handle 30A so they should be more than OK for the 30A max input currents. But notice the small hole at the bottom right, yep it's fried!!!!


And wow, it blew a small hole out of the aluminium heat sink, impressive!!! I've now taken the rectifier off the board and have discovered the first real problem. It is no longer made and worse, the pin out is non standard!! It sits a fair way off the board so I have to hope I can find a way to make some sort of adapter for a new rectifier, we shall see. And lastly, a few photos of the insides for context:






Plasma progress

Well I replaced the resistor thing but it blows the fuse. That in itself is not a bad thing because I am trying to get it to start on a 13amp fuse and it probably should be on a 30 amp circuit however the flash that appeared close to the resistor was more worrying, do I really want it on a 30 amp circuit at this stage I wonder? The resistor is part of a soft start circuit, once the power supply gets up to speed a relay bypasses the resistor. The idea is to limit the initial in rush currents. I suspect that for some reason the bypass relays have not done their job and there has been welding current going through the resistor causing it to explode. But having said that even after the brief turn on it was pretty hot, and I have to wonder where the flash came from. It was probably wishful thinking to thing this would be easy!

Sunday, 13 May 2012

Tesla is the boss

A tesla valve. A oneway(ish) valve with no moving parts. 

Car part design = WTF

I spent a good part of today helping a friend fix the central locking on his car. It turned out to be a dry joint on a PCB in the locking module itself. Because of this the system though the door was open all the time and because of that it refused to operate the central locking for the rest of the car, cue a long walk around to the passenger side everything he came to lock up.

The actual repair took about 30 seconds and a bit of Google time researching the issue however we spent almost half a day getting at the locking mechanism, removing trim panels, wrestling with wiring looms. And when we finally liberated the lock it was hard to tell which end was which. It looked as if it was a space ship or had been designed by genetic algorithms or a room full of monkeys, I could simply not imagine any logic that would lead to this design. I really wonder how they come up with them. Are they given a space in which they must force a part like this? Is it form following function? Is it design for manufacture? I just don't know.

Saturday, 12 May 2012

Fruits of my labour

So this is what I ended up making in the workshop last weekend, an adapter so I can use a proper saddle on my exercise bike, the old one was like a bench with no room for my thighs to move up and down. This one is still quite uncomfortable but my butt should soon toughen up and hopefully I will reduce the gravitational pressure now I have removed all excuses stopping me from using it.

Hmm plasma

I have a super special secret idea for a CNC plasma cutter but my plasma cutter is a bit of a wimp, an ancient Hypertherm 380 which can only cut 3mm max properly. Looking at better machines today made me realise why I have such a wimpy machine. A Hypertherm Powermax45, which is the daddy, and will cut 12mm steel is a whopping £1756 inc VAT. So I had a look on Ebay, you know, just in case, and found one available that was not working, some disk shape part had blown and the supplier would only offer to change the board out for £500.  Well as the guy said he had it for sale elsewhere I gave him a call and we negotiated a price. Given the torch itself is a £350 spare I could not expect to pay peanuts but I think it was fair. I'll divulge the amount when (if?) I get it working! I could not resist going to pick it up straight away so had an enjoyable drive to Richmond in London where I met him at the edge of the Thames in the pitch black. This is not as bad as it sounds as he lives in the middle of the river on a boat, a very nice chap he was too!

So here it is:


Its actually smaller than my old one and possibly lighter, that's progress for you! And here is at least one of the reasons it is not working:


The supplier would not even look at replacing the parts on the board which is a shame because I put this into Google and found out immediately that it is a 10ohm circuit protection thermistor by Ametherm. I just ordered a couple from Farnell for around £3.50 each. If this is all that is wrong then I will be a very happy bunny indeed but we shall see, maybe tomorrow, bum it's Saturday tomorrow :(

Thursday, 10 May 2012

3D printer now live on kickstarter

The printer I mentioned earlier is now live on kickstarter. I've actually bought a suitable projector through my work to build one from scratch to use in my "proper" research but I believe in this project so much I have decided to back the project personally so will be getting one of the complete kits when available for use in The Littlest Workshop.

I could probably build something using the surplus parts I have for far less money so why have I decided to go down this route? If you look at commercial machines the one area they vary is in the means of release of the part from the bottom of the build vat, others build from the top down to avoid this issue. Michael has found a solution that avoids current patents and has then made it public, he also intends to make the project open source.

This in my mind is quite selfless, it is likely that in a short period of time there will be a myriad of people jumping on the band wagon, this will surely include the big players. This means that his decision possibly limits the future of his venture, however he is not fazed and clearly just wants people to have printers to play with. The upshot is that the copy cats and big players will drive down prices and future generations will not only be cheap compared to current commercial offerings but genuinely affordable.

So I feel I want to support his noble cause and the fact I get a tried and test 3D printer out of it is a real bonus. As for the projector I still have at work, I am sure I can make use of that, perhaps an ultra high resolution printer using high quality parts or perhaps I will investigate some more usual printing ideas I have.