Limited workshop space, unlimited interests... "The Littlest Workshop" the bastard child of "The Little House On The Prairie" and "The Littlest Hobo" TV shows. My interests include EDM, CNC, Camping, injection moulding, welding, inventing, casting, bushcraft, composites, 3D printing, micro-RC, ornithopters, optics, microcontrollers, Ukulele, lock picking, cycling, safe cracking, motorcycle restoration ... Maybe tomorrow my projects will be finished?
Friday, 18 May 2012
Success!
Looks like my repair was successful as I was able to make some nice test cuts in 3mm steel, it really is like a knife through butter. Next I need to sort out a proper 30A connection so I can try cutting 12mm as an acid test.
 Amongst some welding practise you can see a little plasma cut face, there as a little slag on the cuts because of having to pierce but it knocks off.
 This is more like it, really nice cuts and a super finish, very little slag on the lower surface, with practise or better, CNC, this would be awesome.
Chrome browser tips
I am always surprised when I watch other people browse because they don't use some of the really handy features of the browser that make navigation much quicker, especially when manically researching using multiple tabs. The tips below also work on some other browsers.
1. Middle click to open a link in a new tab, i.e. press your roller, this is much quicker than right clicking and selecting open in new tab.
2. Close tabs with a middle click on the tab. You can do this even if you are not currently viewing the tab, its a quick way to get rid of tabs you are done with without losing your place.
3. Reorder tabs, you can simply drag them from side to side.
4. Pull a tab out of the browser, click on the tab and drag it, either into another instance of the browser or onto the desktop to become a new browser with only one tab. This is great for dual monitor systems. I think you can also drag them from Chrome to Firefox IIRC.
5. Middle click on the back button, this creates a new tab with the previous page loaded and the history so you can use the back button again from that tab, this is great if you want to go back AND keep looking at the page you just got to. Similarly you can right click on the back button and middle click on any of the links.
6. Right clicking on a tab gives some handy options as well.
1. Middle click to open a link in a new tab, i.e. press your roller, this is much quicker than right clicking and selecting open in new tab.
2. Close tabs with a middle click on the tab. You can do this even if you are not currently viewing the tab, its a quick way to get rid of tabs you are done with without losing your place.
3. Reorder tabs, you can simply drag them from side to side.
4. Pull a tab out of the browser, click on the tab and drag it, either into another instance of the browser or onto the desktop to become a new browser with only one tab. This is great for dual monitor systems. I think you can also drag them from Chrome to Firefox IIRC.
5. Middle click on the back button, this creates a new tab with the previous page loaded and the history so you can use the back button again from that tab, this is great if you want to go back AND keep looking at the page you just got to. Similarly you can right click on the back button and middle click on any of the links.
6. Right clicking on a tab gives some handy options as well.
Rectifiers in
My plan to install the new rectifiers in a twisted orientation to make up for the incorrect pin out worked. After cleaning the heatsink and the IGBT's with IPA to remove the heat transfer compound I applied fresh and reassembled. It turns on but makes a funny crackling sound, turns out this is normal according to some forum posts (one by a Hypertherm employee).
Tomorrow I hope to sort out a proper high amp socket so I can see if she cuts. Will also find out for sure if the softstart relays are switching because if not the NTC resistor is toast!
Almost there now, I hope!
Tomorrow I hope to sort out a proper high amp socket so I can see if she cuts. Will also find out for sure if the softstart relays are switching because if not the NTC resistor is toast!
Almost there now, I hope!
Wednesday, 16 May 2012
S&G combination lock strip down
My combination lock arrived yesterday, a bit grubby inside so I stripped her down and gave it a bit of a clean. Need to sort out a mount for it
Stripped and cleaned.
Abort face palm
Looking at the underside of the PCB at a space where a rectifier should be made me think, hmm why don't I just stick a rectifier in there from this side, just to see if the beast will boot up.
So I did, and it works! The professional electronic engineer should avert his gaze now but for everyone else here is my temporary kludge:
Thank F for that!!
So I did, and it works! The professional electronic engineer should avert his gaze now but for everyone else here is my temporary kludge:
I have a huge collection of these rectifiers, I think they are International Rectifier (oh yes it says on the side) and they will do about 25A. They were used in a project by Nottingham university on wind power, apparently the implementation was done by contractors in Scotland on site, it seems they did not realise that these devices are really designed for crimp terminals nor did they have a soldering iron big enough to solder them, so they just put the wire through the hole and soldered it back to itself with a little extra solder for good measure. Out of about 50 rectifiers I have not found one good joint! Not that this is a lot better, but....
It works!! At least it does not explode and not exploding is always good in electronic circles! I get the proper (yet wrong) rectifiers tomorrow and will mount them properly also replacing the thermal transfer compound on the IGBTs.
Thank F for that!!
Face palm
Put the board back with only one rectifier and no joy, then realised that they are not wired in parallel rather one for neutral and one for live, doh!
The plan
The original rectifiers sit off the board by quite a way and are then screwed to the heat-sink. This means there is a gap between the board and the rectifier. I'm hoping that I can bend the leads of another rectifier to fit. The original devices were Semikron SKB 51L16-W, which can do 29A forward current and are rated to 1600V.
The selection of leaded rectifiers available is not huge but I found a Vishay GBPC3512W which can handle 35A and 1200V. I lose a little on the voltage overhead but I suspect 1600V was overkill anyway. The package has a similar thickness but a different pin out. The following is what I plan:
It does not show that well but the general idea should be obvious, the twisted positions are the new rectifiers, twisting reduces the length of lead between the board and rectifier, much more and they probably would not be long enough, it still might be boarder line because of the stand off. I think I will turn some spacers to act as a jig when soldering and to ensure the right stand off. Will probably have to be split so I can remove them afterwards.
If this doesn't work then I may have to try and make some weird intermediate PCB from copper sheet, sounds like a recipe for disaster. While I wait for the rectifiers I'll check the rest of the board, I may even try "booting" from the remaining rectifier, if all else is well it should work and if it blows it shows the problem lies further in.
The selection of leaded rectifiers available is not huge but I found a Vishay GBPC3512W which can handle 35A and 1200V. I lose a little on the voltage overhead but I suspect 1600V was overkill anyway. The package has a similar thickness but a different pin out. The following is what I plan:
If this doesn't work then I may have to try and make some weird intermediate PCB from copper sheet, sounds like a recipe for disaster. While I wait for the rectifiers I'll check the rest of the board, I may even try "booting" from the remaining rectifier, if all else is well it should work and if it blows it shows the problem lies further in.
And in case it helps anyone this is the first draft of the first stages of the power supply where the problems have arisen (drawn in Diptrace).
Subscribe to:
Posts (Atom)







